Water Treatment Biocides

DBNPA 20%                                                      Email:sales@ozziechemical.com

Fast acting, broad spectrum biocide for treating raw materials,process water, and contaminated products and systems





Chemical name: 2.2-Dibromo-3-Nitrilopropion Amide(DBNPA)

CAS No.:10222-01-2

General

DBNPA 20% Microbicide offers broad spectrum control of bacteria, fungi and algae.It is quick-acting and breaks down rapidly into non-hazardous materials. Active Ingredient 2,2-Dibromo-3-nitrilopropionamide (DBNPA).

Typical Properties
These properties are typical but do not constitute specifications

Appearance

Clear colorless to amber liquid

Active Ingredient

20%

Inert Ingredients

Water and polyethylene glycol

Specific Gravity (g/ml)

1.235 to 1.285

pH

2-5

Product Benefits

1.Able to eradicate a wide range of microbes (fungal, bacterial, algal).

2.Minimizes production down time and delays due to contamination.

3.Environmentally friendly.

4.Handling ease.

5.Does not contribute problematic components to formulate or create long term health and safety concerns.

Directions for Use

DBNPA 20% can be added at any phase of production provided that thorough mixing is achieved. Should the manufacturing process involve heating of the product, it is advisable to add DBNPA 20% after cooling down at the end of the process.

DBNPA 20%  may be used to reduce microbial contamination in raw materials and/or products such as aqueous paints and coatings, polymers, slurries, adhesives, latex and resin emulsions, sizing, caulk, process water, along with specialty industrial products including inks, polishes, waxes, detergents and cleansers. To reduce microbial contamination, add DBNPA 20%  to the material or product at a concentration of 25 to 2,000 ppm by weight. This concentration is equivalent to 2.8 to 224.0 fluid ounces of DBNPA 20% per 1,000 gallons or 21.4 to 1,712 milliliters of DBNPA 20%  per 1,000 liters. The required concentration will depend on the material being treated and the level of contamination present.

Stability

DBNPA 20%is stable under normal conditions. Avoid process temperatures of 70°C (158°F) or higher and the use of strong reducing agents.

Handling

Please refer to the safety data sheet of this product for precise handling instructions. The processing and use of industrial chemicals require adequate technical and professional knowledge.

In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing. In case of eye or skin contact, despite precautionary measures, wash immediately and thoroughly with plenty of warm water and obtain medical attention. Vapors, including cyanogen bromide, may be present in unvented containers. These vapors may be irritating to the upper respiratory tract of workers, who allow their mouth or nose to get close to the container opening.

Packing

25Kg per drum, 250Kg per drum or 1250Kg per IBC drum.