In-Can Preservation

CMIT/MIT-1.5F                                                Email:sales@ozziechemical.com

In-can Preservation for Paints and Other Technical Products




Chemical Name: chloromethylisothiazolinone/methylisothiazolinone

CAS No: 26172-55-4/2682-20-4

General

CMIT/MIT-1.5F Biocide is an active ingredient preparation of chloromethylisothiazolinone/Methylisothiazolinone and formaldehyde to preserve paints, binder dispersions and other technical products.

Typical Properties

These properties are typical but do not constitute specifications

Appearance

Bluish or bluish green, clear liquid

Active Ingredient

1.5%chloromethylisothiazolinone/methylisothiazolinone

pH-value, as is

2-5

Specific Gravity (g/ml) at 25°C

1.029 ± 0.01

Stability

Temperature: up to 40°C (short periods to 60°C), pH range: 4 to 9

Application and Activity

CMIT/MIT-1.5F is a wet state preservative with a very wide application field such as paints,plasters, adhesives, inks, dispersion and emulsion binders and aqueous technical products.

Dosage

The number of technical products being preserved with CMIT/MIT-1.5F is increasing steadily and it is not always possible to predict its suitability. The optimum use should be established by a preliminary experiment. In critical cases, predilution with water is often helpful. The optimum dosage rate of CMIT/MIT-1.5F depends upon the degree of contamination and the susceptibility of the product to be preserved.

Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination of germ counts can assist in choosing the optimum dosage rate.Therefore, the ranges of concentrations listed below should be taken as general guidelines only:

Binders 0.05 - 0.30%

Other products                         0.05 - 0.15%

Packing

25Kg per drum, 200Kg per drum or 1000Kg per IBC drum.